Huawei Honor 6x Back Cover Replacement

Geschrieben von: Hudson Brooks

Kommentare: 1

Schwierigkeitsgrad

Moderate

Schritte

Zeitaufwand

10 - 20 Minuten

Einleitung

This guide will be detailing how to separate the screen and back panel in your Huawei Honor 6x. This the first step in most replacement guides for this device.

Werkzeuge

Schritt 1

Turn off the device.

Schritt 2

Insert the SIM Card Eject Tool into the SIM card tray hole.
Press the eject tool into the hole until the tray clicks open.

Schritt 3

Remove the SIM tray from the device using two fingers.
When reinserting the SIM card, be sure it is properly aligned with the SIM tray.

Schritt 4

Remove the SIM card from the compartment using two fingers.

Schritt 5

Insert a plastic opening tool into the Micro USB charging port with the the angled side of the tool facing the screen.
Pry the screen off the back of the phone by pushing down on the opening tool.

Schritt 6

Slide the opening tool or spudger along the bottom of the phone and around the edge.

Schritt 7

Once three sides of the screen are detached, pry the phone apart using two hands.
When separating the back panel from the screen, do not pull them too far apart. There is an interconnect that is attached to both sides that could break, or tear, if pulled too far.