Einleitung

If the camera of your Huawei Honor 6x is inoperable and the problem is not due to a cracked cover, the rear camera will need to be replaced. Removing the broken camera assembly is simple and easy after opening the phone.

  1. kuwIeijVmH4jm1VK
    • Turn off the device.

  2. KpsZEIp31MDeJdU6
    KpsZEIp31MDeJdU6
    PsmlrOAeslMMSEsg
    • Insert the SIM Card Eject Tool into the SIM card tray hole.

    • Press the eject tool into the hole until the tray clicks open.

  3. HWYfZebxJAGrZKNn
    • Remove the SIM tray from the device using two fingers.

    • When reinserting the SIM card, be sure it is properly aligned with the SIM tray.

  4. i26Y3dL6F1UxG6I1
    • Remove the SIM card from the compartment using two fingers.

  5. aEIcQnbdj54FsUjZ
    aEIcQnbdj54FsUjZ
    heDAAV6NC2VSgwlG
    • Insert a plastic opening tool into the Micro USB charging port with the the angled side of the tool facing the screen.

    • Pry the screen off the back of the phone by pushing down on the opening tool.

  6. pZCoWJljbHgUHOcM
    pZCoWJljbHgUHOcM
    jlooiTmCa6HJSLpA
    lDDhuWwdRwZUyyng
    • Slide the opening tool or spudger along the bottom of the phone and around the edge.

  7. EJEFrqp1Yt2Epgdp
    EJEFrqp1Yt2Epgdp
    MAcRBWU1imDEJIvP
    • Once three sides of the screen are detached, pry the phone apart using two hands.

    • When separating the back panel from the screen, do not pull them too far apart. There is an interconnect that is attached to both sides that could break, or tear, if pulled too far.

  8. T2NJB6exynOgcKgp
    T2NJB6exynOgcKgp
    AOGCLZVtYB1XUG2T
    aeex1HCutMWxW2jS
    • Remove the five 4mm Phillips #00 screws using a screwdriver.

  9. QaNYi3ysDSio4XXF
    • Remove the motherboard cover from the device using a spudger or your fingers.

    Always wear ESD Gloves before handling Motherboard.

    anti-static or electrostatic discharge (ESDgloves protect workers and the environment around them .

    Imran Khan -

  10. RYQTD4YwlDyGiXVx
    RYQTD4YwlDyGiXVx
    t5HwNA6DGmoSZc3Y
    t32QiMeC5Y6TMAoI
    • Pry the two connectors off by wedging a spudger, or your finger, underneath the connector.

  11. IIa5WFQGZiOjTNws
    • Gently remove the camera assembly using a spudger or two fingers.

Abschluss

To reassemble your device, follow these instructions in reverse order.

M Morgan

Mitglied seit: 08/10/18

644 Reputation

0 Kommentare