Einleitung
If you are experiencing shutter delay with your Huawei SnapTo G-620's camera, then the camera may need to be replaced. This guide shows you how to replace your SnapTo's camera.
-
-
Pry open the back cover with your fingernail, using the divot to the lower left hand corner.
-
Remove all fifteen 4mm Phillips J00 screws on the back panel.
-
Using a metal spudger or your fingernail, remove the back panel.
-
-
-
Use a plastic opening tool to remove the pictured flat-top connector.
-
Using the plastic opening tool remove the camera.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
