IBM Thinkpad T60 Palm Rest Replacement

Geschrieben von: Dylan Kratochvil
  • Kommentare: 4
IBM Thinkpad T60 Palm Rest Replacement

Schwierigkeitsgrad

Easy

Schritte

5

Zeitaufwand

5 - 10 Minuten

Einleitung

Always power down the computer before attempting any installation/removal of any hardware components. Be sure to remove the AC adapter and all cables from the computer. If the computer has been on, wait several minutes before beginning the procedure to ensure all parts have cooled down.

  1. pxKP25VakaqJM3rP

    • Turn the computer over to see the small tab on the battery located near the top of the Thinkpad.

    • Use your finger to slide the tab to the right to unlock the battery.

  2. QodwUu6CGdxUBYBV
    QodwUu6CGdxUBYBV
    hIwp5OAfuMHDONek

    • Once the tab is in the unlocked position (far right), pull the battery outwards away from the Thinkpad.

    • The battery is now disconnected.

  3. Je6uJb5XYwZY4DiI
    Je6uJb5XYwZY4DiI
    1Mo46ptbOYIxXhLo

    • Using a #0 Phillips screwdriver, remove the four 17.0 mm screws.

    The screws we need to remove all supposedly share the same pictogram imprinted on the bottom case. If this is true why have you circled the rightmost screw in the photo above? The forth pictogram is near the screw below and to the left of the circled screw?

    airshack -

  4. 2VCe5GLSSEb3OXXO

    • Turn the computer back over, so the keyboard is facing upwards.

    • Open the display to access the palm rest. Apply pressure to the sides of the palm rest so that it bends upwards in the middle. Gently lift away from the computer.

  5. AVfsZTiSYoGAERIR
    AVfsZTiSYoGAERIR
    3sgYdGE1AnDKFPbM

    • Slightly lift the palm rest away from the computer.

    • The touchpad's data cable connects the palm rest to the base unit. BE CAREUL!

    • Detach the connector by pulling upwards on the white tab.

    Putting it back on should be covered too, as it’s really hard to get everything lined up. Would be nice for some tips on that. Took me and other experienced guy 45 minutes to get the thing back on, and have all the screws seat!

    Glenn -

    Where in this guide does it say how much RAM is supported? Am I missing something? Looks like two slots?

    airshack -

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Dylan Kratochvil

Mitglied seit: 30/01/13

591 Reputation

Ein Kommentar

Needs a tutorial on how to install it. I can’t get the palmrest on correctly, I can still lift up on the palmrest and the laptop doesn’t latch properly.

Kyle Gilchrist -