India Mark II Cylinder Replacement

Geschrieben von: Andrew Optimus Goldheart
  • Kommentare: 0
India Mark II Cylinder Replacement

Schwierigkeitsgrad

Moderate

Schritte

3

Zeitaufwand

Keine Schätzung

Einleitung

Prereq only.

  1. YeU2CRBDAhMMjAve

    • The last section of riser main pipe will have the pump cylinder attached to the bottom.

    • Pull the assembly of riser main pipe and cylinder out of the well and set the assembly on a block of wood to keep the cylinder off the ground.

  2. CIQgiATvNTHrYUIl
    CIQgiATvNTHrYUIl
    QyBp5MpY3BxsLxxR
    lkvM4ngdGxVgPSkF

    • Using two pipe wrenches, unscrew the cylinder from the riser main.

  3. ejtGPTB1EAyQsWxU
    ejtGPTB1EAyQsWxU
    dBtXtWd1GeJtr6B2

    • Slowly pull the cylinder off of the pump rod, exposing the traveling valve and foot valve.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Andrew Optimus Goldheart

Mitglied seit: 17/10/09

493949 Reputation

0 Kommentare