Infinity v2 10.1 Back Case Replacement

Geschrieben von: Nate Rice
  • Kommentare: 0
Infinity v2 10.1 Back Case Replacement

Schwierigkeitsgrad

Easy

Schritte

2

Zeitaufwand

2 - 10 Minuten

Einleitung

If your Infinity v2 10.1 back case has been cracked or damaged you can replace it with a new back case. This also shows you how to open the back case even if it doesn’t need to be replaced. This is the step you must first take to fix any other problems that there might be with the Infinity v2 10.1 tablet. Overall, replacing the back case should be an easy process.

  1. MbTyY4IiXhQ1Xdtc
    MbTyY4IiXhQ1Xdtc
    VVFNdoEJAMLXMSQT
    f5UnSnWwZyND4GQR

    • Slightly pry open one corner of the device by using your finger nail to separate the screen from the back case.

    • Use an opening tool to carefully detach the back case from the tablet. Start by inserting the tool where your fingernail opened a gap, and work around all four sides of the device.

    • There will be a slight click noise as you free each tab.

    • Once the case is completely free, carefully lift it and place it face up on the workstation, being cautious not to damage the speaker wires connecting the two halves.

  2. FbD1eBpGgWIDnpHQ
    FbD1eBpGgWIDnpHQ
    h5nDOKMT3PE6cKy4

    • Remove the speakers from the case by gently lifting them up and out of their slots.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Nate Rice

Mitglied seit: 31/10/19

321 Reputation

0 Kommentare