Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement

Geschrieben von: Evan Taylor
  • Kommentare: 3
Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement

Schwierigkeitsgrad

Moderate

Schritte

6

Zeitaufwand

30 Minuten

Einleitung

This guide will show the required steps to replace the ice tray on the Insignia Ice Maker.

  1. Aj5YQFqwJsQIdXrd
    Aj5YQFqwJsQIdXrd
    BqlT3T3oEDAGGZTM
    Nc2sM1cfPTVA1NSf

    • Remove the 6 screws holding the rear casing on.

    • Remove the rear casing

  2. iuGmAtXFefohnCqB
    iuGmAtXFefohnCqB
    sacKUcJYNmt2lRAG
    IWcYEVrrIT1PTjRU

    • Remove the 4 screws holding the Ice Tray to the body of the Ice Maker.

  3. fxWrPCJOUeQipiEd
    fxWrPCJOUeQipiEd
    ka3Y4ZR3QPVVfKXm
    jHC4pAHCJiXUyJqf

    • Remove the 4 screws holding the Ice Tray from the top.

  4. lspKW4Q1agUoiOqK
    lspKW4Q1agUoiOqK
    6JjbXTHNWRqH3InZ

    • Lift the Water Pump out of the way

  5. KHomjxDnqjLgqc3F
    KHomjxDnqjLgqc3F
    DCVpq6kFXQeTOiee
    IVKbfi3e3EjMGT5E

    • Remove the final 2 screws.

  6. S2NMQkhlKycBm4Ut
    S2NMQkhlKycBm4Ut
    WWIDNpZuFZOEBHDW
    Opdu3puqLJf65UKh

    • Remove the plastic cover from the circuit board by pressing the lever on the side. A pry tool may be required.

    • Disconnect the water tray cord.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Evan Taylor

Mitglied seit: 18/01/18

592 Reputation

3 Kommentare

Where do I find insignia ice maker ns- imp26ss7 replacement ice forming tray? Can't locate item on the internet.

razorbllade -

I found a seller on ebay that has 7 of them and is selling them for $20 shipped

er.vanlaarhoven -

https://www.ebay.com/itm/266028470753?ha...

er.vanlaarhoven -