Insignia NS-24ER310NA17 Disassembly

Geschrieben von: Hannah Berenjfoorosh
  • Kommentare: 0
Insignia NS-24ER310NA17 Disassembly

Schwierigkeitsgrad

Moderate

Schritte

6

Zeitaufwand

10 Minuten

Einleitung

This guide will take you through the process of disassembling the housing of the Insignia NS-24ER310NA17 in order to gain access to the inner parts. This is a primary step for most replacement guides regarding this device.

  1. ULH45evFNFRQTNlY

    • Place the TV face down so you have access to the back.

  2. 3QDjoaKT3JU1hvku
    3QDjoaKT3JU1hvku
    AHA3TxX4V6Duc3PJ
    41G3JgpZTPjI43UU

    • Rest the TV on its top edge so you have access to the base.

    • Use a Phillips #2 screwdriver to take out the four screws on the bottom of the base.

    • Remove the base from the frame.

  3. foIimx5fFWLi3Htx
    foIimx5fFWLi3Htx
    G22xkKKFjFUQA6Hp

    • Lay the TV face down.

    • Use the Phillips #00 screwdriver to remove all of the Phillips Head Screws from the the back of the TV.

  4. bUnMoJ1PmekrGbaJ

    • Stand the TV on its top edge.

    • Gently pry apart the front and back of the TV.

    • The two halves should pull apart easily since there are no longer any screws holding it together.

  5. SFFSpvLB5cZhWfEg
    SFFSpvLB5cZhWfEg
    hECYwNdZDuDkMFbT
    ATKoc1TCnQ5INiKj

    • There are wires still connecting the two halves.

    • Remove all the pieces of tape to detach the wires from both sides.

  6. NNUMKqaVSkcPyoby

    • Completely pry apart your TV.

    • You should have a clear view of the inside on both sides.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Hannah Berenjfoorosh

Mitglied seit: 23/01/18

518 Reputation

0 Kommentare