Einleitung

This guide shows you how to remove a faulty motherboard (also known as a main board) from your Insignia NS-24ER310NA17. To replace it, insert a new motherboard by following the directions in reverse order. This should fix display issues such as half the image being black or lines running across the screen.

  1. ULH45evFNFRQTNlY
    • Place the TV face down so you have access to the back.

  2. 3QDjoaKT3JU1hvku
    3QDjoaKT3JU1hvku
    AHA3TxX4V6Duc3PJ
    41G3JgpZTPjI43UU
    • Rest the TV on its top edge so you have access to the base.

    • Use a Phillips #2 screwdriver to take out the four screws on the bottom of the base.

    • Remove the base from the frame.

  3. foIimx5fFWLi3Htx
    foIimx5fFWLi3Htx
    G22xkKKFjFUQA6Hp
    • Lay the TV face down.

    • Use the Phillips #00 screwdriver to remove all of the Phillips Head Screws from the the back of the TV.

  4. bUnMoJ1PmekrGbaJ
    • Stand the TV on its top edge.

    • Gently pry apart the front and back of the TV.

    • The two halves should pull apart easily since there are no longer any screws holding it together.

  5. SFFSpvLB5cZhWfEg
    SFFSpvLB5cZhWfEg
    hECYwNdZDuDkMFbT
    ATKoc1TCnQ5INiKj
    • There are wires still connecting the two halves.

    • Remove all the pieces of tape to detach the wires from both sides.

  6. NNUMKqaVSkcPyoby
    • Completely pry apart your TV.

    • You should have a clear view of the inside on both sides.

  7. wXN1SXUrTUVLTZp6
    • Remove all strips of tape attached to the silver steel rectangular piece.

  8. lvGuoRgEZIYEs5lt
    • Pull the red wire out from under the black plastic clip.

  9. TWJ3UIBVMLj1wQwR
    TWJ3UIBVMLj1wQwR
    xFcjk45RBWP5hpQr
    • Unscrew the four screws surrounding the steel rectangle with a Phillips 00 Screwdriver.

  10. a1UaRcHaBJMZyu5R
    • Carefully lift the rectangular piece.

  11. RQbwU2USXgFuMgUh
    • The rectangular piece will still be attached to the motherboard beneath it with a strip of tape. Remove this strip of tape.

  12. xcWNLuutYyptrpOf
    xcWNLuutYyptrpOf
    cmYSmR4nnYcqAoyj
    • Use a Phillips #00 screwdriver to remove the two screws on both sides of the motherboard.

  13. eJrGsJRlAVBMXUKw
    • Carefully lift the motherboard away from the television.

    • Keep in mind that the motherboard is still attached by several thin wires and should not be tugged.

  14. c1wLokabICmLftVW
    c1wLokabICmLftVW
    WqIcKLghDPCIIyTh
    M1tFCLxv4IjeFxJt
    • There are 5 wires attached to the motherboard. Remove the two thicker white wires to the right of the red wire.

  15. G6hv3Rxtva3gZMOK
    G6hv3Rxtva3gZMOK
    xnrGb2vcbnKIcOVK
    s2mSgKZcjdILmxuO
    • Remove the remaining three wires from the mainboard.

  16. Y521RopVhO5wBKm6
    • Carefully remove the mainboard from the television.

    • You have now successfully removed the mainboard.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Maggie Kuntz

Mitglied seit: 23/01/18

301 Reputation

Ein Kommentar

Did all said including main board replace still no picture

d k -