Einleitung

  1. gPIjCVR2njRLEv2d
    gPIjCVR2njRLEv2d
    E3bLRcgUFoE2FlDB
    • Turn the boombox around to see the back, and then flip it upside down.

    • Insert a 2.5mm flathead driver into the two holes next to the battery compartment.

    • Turn the driver counterclockwise several times to loosen and pull out the 17mm screw.

  2. Nm2SfjWBleVxVGYK
    • Peel off the two black square foams in front of the battery compartment to reveal a screw under each one.

  3. 2n5QRJeYeNbOSMmJ
    2n5QRJeYeNbOSMmJ
    QihmfecacCJQkSnC
    • Remove the two 8mm screws using a 2.5mm flathead driver.

    • The front grey panel will loosen up once the final screw is removed.

  4. 6MjrQkf2mOxYnS3B
    • Turn the boombox on its back.

    • Release the front panel by pushing down on the latches holding the panels together.

    • There are four silver latches on the top side of the panel and one on the bottom.

    • Do not force the panel comletely off, there are cables attached inside.

  5. vZjThWpWgbuUG2LL
    vZjThWpWgbuUG2LL
    TTGMwogXipLMCmXH
    • Turn the boombox around to view the back and lift the handle up.

    • Using the same driver with 2.5mm flathead, remove the two 14mm screws under the handle.

    • Gently lift the black top but do not pull completely away.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Cristina Ruiz

Mitglied seit: 12/09/16

137 Reputation

0 Kommentare