Insignia NS-CSPBTHOL-R Speakers Replacement

Geschrieben von: Lheessis Ruiz
  • Kommentare: 1
Insignia NS-CSPBTHOL-R Speakers Replacement

Schwierigkeitsgrad

Easy

Schritte

8

Zeitaufwand

10 Minuten

Einleitung

If your speakers no longer sound strong/clear or they stopped producing sound, you may need to replace them. Use this guide to help you replace he speakers.

  1. bjlVAbPE4aaBiGCW

    • Insert the Spudger between the grated panel and the base of the speaker.

  2. MZndyhsLIWOJOVKI

    • Pull the grated panel off

  3. HjLpF1h1NDf5nIKb

    • Remove the six 3mm screws using the J00 JIS screw bit. This will require a long, narrow screwdriver.

  4. vEQeAZGRK6XwbQkZ

    • Insert the Spudger between the corners of base and the face of the speaker to open the device.

    • The screw on the upper right corner may be difficult to take out. If you cannot take it out with a screwdriver, using force to pull the face of the speaker apart may break the plastic that surrounds the screw.

  5. cJCFZZdZsI6JrTbT

    • Remove one speaker at a time

  6. Cd5bSvKY1kJ5lVGX

    • Grab the back piece of the speaker and gently pull upward.

  7. oU3AECjybLXntfKc

    • Remove speakers gently one at a time.

  8. lOM1AYmvDRiNBXWG
    lOM1AYmvDRiNBXWG
    anYZglJWUXFWMl5L
    ic4xwejdTFmuccIc

    • Using blunted tip tweezers, squeeze and pull on the white plastic clip. This will separate the speaker's wires from the motherboard.

    • The wires are connected to the white plastic clip that is attached to the motherboard.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Lheessis Ruiz

Mitglied seit: 15/02/17

101 Reputation

Ein Kommentar

This is a good app really could help some people like myself. Thank you

rrguerrero7330 -