Insignia NS-F12R6-SS Fan Blade Replacement

Geschrieben von: Hank
  • Kommentare: 4
Insignia NS-F12R6-SS Fan Blade Replacement

Schwierigkeitsgrad

Easy

Schritte

5

Zeitaufwand

7 - 10 Minuten

Einleitung

In order to access the back of the fan cage and the motor housing, the fan blades must be removed.

  1. NSnXXFqLnrZGoQkw
    NSnXXFqLnrZGoQkw
    VxAWkUSaLHDkHNWr

    • Unplug your fan.

    • Remove the 20 mm bolt that fastens the fan ring located at the bottom of the fan cage with a Phillips #3 screwdriver.

    Missing details- when unscrewing the bottom bolt, add a side note to have the viewer hold both sides and add pressure to unscrew

    Aliyah Malapit -

  2. yCEqqSEdfVGXUGUG

    • Remove the ring that runs around the edge of the fan cage.

  3. C5A1ebcTqZjfDrL2

    • Remove the front of the fan cage.

    Missing details- when removing the fan cage, remind viewer to use both hands to remove the cage to avoid damage to the fan.

    Aliyah Malapit -

  4. Sf1GrKJAYQBrBJfU

    • Remove the 8 mm bolt fastening the fan blades to the rotor with a Phillip #3 screwdriver.

    Prefer a picture taken from an upward angle, similar to the step beforehand, to reveal the screw.

    Missing detail- remind viewer to use Phillips #2 screw.

    Aliyah Malapit -

    I lost this screw and I want to buy it but I don't know the exact size. It says 8mm but that is the length size right?

    Miguel Dang -

  5. kyNsmEhZ5OGGaDDk

    • Take caution when removing the fan blades. They can be sharp!

    • Slide the fan blade off the end of the rotor.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Hank

Mitglied seit: 17/09/18

1064 Reputation

0 Kommentare