Insignia NS-SPBTBRICK-CM Back Cover and Battery Replacement

Geschrieben von: Erin Steele
  • Kommentare: 0
Insignia NS-SPBTBRICK-CM Back Cover and Battery Replacement

Schwierigkeitsgrad

Moderate

Schritte

8

Zeitaufwand

30 Minuten

Einleitung

Make sure the device is powered off before you start following the instructions. If you have a physical disability with your hand, wrist, or arm consider having a different individual help you because the tasks require steady hands. Be sure to work on a flat surface and to not lose any of the small parts because they are very small and can be lost easily.

  1. KRk513qhhhNDoM2l

    • Remove the rubber sleeve.

  2. 6sfHiCWDnLmMIKKt
    6sfHiCWDnLmMIKKt
    pfySMUDditPLWqcX

    • Use the specified screwdriver to unscrew the ten screws on the back cover.

  3. NqXMYVoNHAqhS2ia
    NqXMYVoNHAqhS2ia
    CnG6y2NH2yHyKLaQ

    • Remove the back cover. Be careful to not lose any of the screws because they are extremely small and can be easily lost.

  4. 4xZZue4ROrvd5GyW
    4xZZue4ROrvd5GyW
    YYpwKoodrORiHDKC

    • The battery will be attached to the back cover with sticky tape. Unplug the wires connecting the battery to the speaker.

    • Using one of the four blue opening tools, pry the battery off of the back cover.

  6. My16OMRiES56URpE

    • Stick the new battery to the back cover using sticky tape.

  7. IQRkcKUgwXI2kvWf

    • Connect the wire from the new battery to the bluetooth speaker.

  8. LLrriPyJI4UFQvgn
    LLrriPyJI4UFQvgn
    WyiyelrGmMqolxCj
    eueK61O5HSDSNTQD

    • Place cover back on and using the iFixit screwdriver PH000, screw the ten screws back onto the back cover.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Erin Steele

Mitglied seit: 08/03/17

649 Reputation

0 Kommentare