Instant Pot Smart-60 Plastic Base Replacement

Geschrieben von: paola alvarez
  • Kommentare: 18
Instant Pot Smart-60 Plastic Base Replacement

Schwierigkeitsgrad

Moderate

Schritte

5

Zeitaufwand

5 - 10 Minuten

Einleitung

The plastic base covers the electronic components inside the instant pot. Before you can touch anything inside of the device the base must be removed.

  1. DQlh1xxISLKjYfR1
    DQlh1xxISLKjYfR1
    m26HUCqfwMFKPEYB

    • Take off the lid of the Instant Pot. Grasp the handle and rotate the lid counter-clockwise, then lift up to separate the lid from the base.

  2. BSEppnXYMGTZWbDx

    • Take out the inner pot and place it somewhere out of the way.

  3. 4fSHmuctyUabLca5

    • Flip the Instant Pot over on its top so that the base is facing upward.

    Where can I buy that base. Thank you.

    Belinda Berka -

  4. tGZItSePaTZOP2pt

    • Remove the single 12mm Phillips #2 screw holding the base to the device.

  5. Ghx4glKUvphrAj1M

    • Rotate the base counter-clockwise, then gently lift the base off of the device.

    Where can I get this base plate?

    Muhammad Abdullah Sabooani -

    That small round base. Where can you buy one. Thank you.

    Belinda Berka -

    I am also looking for my pot. Any suggestions?

    Sai Parmar -

    I need one tô. Please advise. Thanks!

    le.dieuai -

    Where did you get the base? I need one

    Sarah Parker -

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

paola alvarez

Mitglied seit: 24/01/18

528 Reputation

12 Kommentare

Hi, I would like to know, where can I buy a new plastic base? Thank you

nathaliawed -

Hello where can I buy the plastic base

Maureen -

I would like to buy one of these for an 8 Qt model….very hard to source this and terrible customer support as this seems to be a issue for many that burned theirs.

davidghamilton -

Did you ever find out where you can buy this part.

Thank you. Belinda

Belinda Berka -

Do you carry the replacement for this. Thanks

khai01 -

Has anyone found the replacement part? It isn't available through Instant Pot customer service.

Patti Gregory -

On my Instant Pot Nova Plus series, the screw on the bottom plate is a T15 instead of Philips #2

Cynthia Roessler -

Hi

We also need a new plastic base as ours got accidently melted on the stove.

Any sources for replacement part

Thanks

Doug -

Does anyone know where to by the plastic bottom

pljonesvfd11 -

Hi,

We also need a new plastic base as ours got accidentally melted on the stove.

Any sources for replacement part

Thiago Pontelli -

Hey I would like to buy this, and could I know how I can get it?

Kaylee Chu -

I need one - the whole base. Who else did burn one :-) ??

Were do I get this item? All other appliances I'm used to have a blow-up drawing, where every single item usually can be sourced.

Had higher expectations for Instant Pot in regards to spare parts, one of the reasons I did not want a knock-off,

Basti_D -