JBL Charge 2 Plus full disassembly

Geschrieben von: Pavel Amelyanenka
  • Kommentare: 25
JBL Charge 2 Plus full disassembly

Schwierigkeitsgrad

Moderate

Schritte

18

Zeitaufwand

20 Minuten - 1 Stunde

Einleitung

  1. ECANhWFDWQkq2qL5
    ECANhWFDWQkq2qL5
    Uujdso2fA4ffqPBh

    • Put in the wisdom here.

  2. 2EPeGGKxJulXqbUy
    2EPeGGKxJulXqbUy
    pZYc6cGBbNTiFlFd
    ntODmuIMmxg2NgMZ

    • Put in the wisdom here.

  3. 2tZ1WrckrpF3YroR
    2tZ1WrckrpF3YroR
    PF5cv321K3PMrk2S

    • Put in the wisdom here.

    My charge 2 plus is different from this one. The screws are different. There are no screws on the side speakers and the battery cover is not the same.

    sir.rapses -

    Original device?

    Not fake?

    Pavel Amelyanenka -

  4. ZdUSqOX5Wu3APsnq
    ZdUSqOX5Wu3APsnq
    11qAJV4DuXMcE11N

    • Put in the wisdom here.

  5. hhEJqNj6cPPuE3LC
    hhEJqNj6cPPuE3LC
    HdZ4tgdXi3vsIICj
    3PKNqdMOacANEgVI

    • Put in the wisdom here.

  6. 2AAe6ZbaCxE2XISO
    2AAe6ZbaCxE2XISO
    WnYJUxOPE2dPiCo4

    • Put in the wisdom here.

  7. WeG2VLveQot1H2JV
    WeG2VLveQot1H2JV
    CPapDX2OBST6q4ML
    QaurDZTyfTMHMsLx

    • Put in the wisdom here.

    Hey,

    So I have no experience on working with electronics. Does anyone know how I should remove these wires?

    Arjen de jong -

  8. mkThKu6EfPwMp1hC
    mkThKu6EfPwMp1hC
    Jk1qJC4K3ARERyVw

    • Put in the wisdom here.

  9. 6qogcYCnM41QlJiL
    6qogcYCnM41QlJiL
    LPjdOGX2lOy2qyHJ

    • Put in the wisdom here.

  10. BI5AWZxbVV3UTts6
    BI5AWZxbVV3UTts6
    YPh5UncZRuvxeVec

    • Put in the wisdom here.

  11. MaWhsGhSb4F3If61
    MaWhsGhSb4F3If61
    6tdCWtjBHWqnbrFs
    UDFVacaQixQOHB3f

    • Put in the wisdom here.

  12. xZFLjTKPXHoQtrYV
    xZFLjTKPXHoQtrYV
    VmPBGbAIUwIYgTUA

    • Put in the wisdom here.

    здравстуйте, подскажите где можно закать этот шлейф, и можно ли купить новый корпус

    Денис Мирный -

  13. NCrefksGHmVKIjcT
    NCrefksGHmVKIjcT
    s5RI4kaUL6lrfCMy

    • Put in the wisdom here.

    You do not need the steps 13 -15 as it is possible to unplug de flex with the bottom PCB still installed.

    For this I removed the speaker cable for better access.

    But you’ll need long pliers and patience to plug it back in

    Martin Stegmann -

  14. Cqe54ZhQQFkbJSTA
    Cqe54ZhQQFkbJSTA
    2XBMdxEw3DehvAQ5

    • Put in the wisdom here.

  15. n1miANmkjKRWqEK4
    n1miANmkjKRWqEK4
    EWPuCvMFFAQNwdsU
    Ifc1Cm5WQFPhk1Bd

    • Put in the wisdom here.

    what do we call this part of the motherbord?

    You Tech -

  16. sMCOeuAQG1epoVDv
    sMCOeuAQG1epoVDv
    IQjYYY4LARtTWWjI
    DDYqAgjD35bnhRFV

    • Put in the wisdom here.

  17. AbvkXtT2nubYJQlN
    AbvkXtT2nubYJQlN
    Gmr1t5ilQPnVUaFq
    nPj5qRMSGNBJ1WYM

    • Put in the wisdom here.

  18. vAcNmUKoDEUSNKEG
    vAcNmUKoDEUSNKEG
    xl5ZNFRGPIETDnXg

    • Put in the wisdom here.

    On the first picture above, what is the object with the number 100 on it, what is its function and how do I replace/attach it if it came loose?

    brenbampton411 -

    yah dude me too I need that part

    Vm Bro -

    From where we can get JBL ORIGINAL MOTHERBOARD??

    Annora Petrova -

Abschluss

To reassemble the device, follow these instructions in reverse order.

Tinte & Feder

Pavel Amelyanenka

Mitglied seit: 05/11/16

844 Reputation

16 Kommentare

Great. Thanks to your help I got my JBL back. Thank you and I hope you continue to help other people.

Heitor BC -

AWESOME! Glad to hear, it was helpful.

irlanda -

So our speaker hit the ground and that little piece with the 100 on it has separated from the motherboard. Is there anyway to fix that without replacing the whole thing?

somer.yocom -

Yes, this is not a problem. It is enough to solder this part into place. And everything will work perfectly.

Pavel Amelyanenka -

привет павел, у меня тоже есть такой проблем. мой синок удалил на полу мой jbl. и ето маленкой деталь 100 развалился. но я и потерял етот деталь. если у тебе ест информация скажи пожалуйста точное име деталь 100 которий находится на верху интегральной схеми ( 100 написано с белие цифри)спасибо

Илко Маринов -

hi

this is the usual inductor

https://www.aliexpress.com/wholesale?cat...

Pavel Amelyanenka -

My one was on charging and something happened it still works but sound is very very low .. U need to put that next to ur ear to listen .. I opened that and found the near the speaker connector(on the left side corner) the board is hot… what to do

Soni -

Hi.

Specify in the photo the most precisely the place of heating.

Pavel Amelyanenka -

подскажите а где на этой плате контроллер питания и зарядки или укажите его маркировку

matrix2007 -

BQ24133

http://vaska.pro/datasheet/bq24133.pdf

https://i.imgur.com/KVWGOPm.jpg

Pavel Amelyanenka -

Step 2 was the hardest part since the industrial glue on the mesh is pretty durable - be careful not to break the speakers in the process

Claas Koester -

I had the same problem with the ‘100’ part that fell off. Unfortunately the flat cable came loose from the board. Any idea how to reattach it? Also, I wish I had seen this page before the dismantling video on youtube. Apparently that was the lazy way: keeping the top on. That would have made all the difference with this flat cable!

Marthin Stout -

Which cable do you mean?

Pavel Amelyanenka -

The flat cable from board to control unit (top). The cable is currently loose on both ends. I thought the flat cable had a (little black) connector sliding into the connector on the board. Turns out this black thing was not connected to the cable. Now I am unsure how to reattach it. Also, I notice from your step 15 that you have a flat cable for the bottom connectors. Either I have not disassembled my unit far enough or my unit does not have a flat cable attached to the bottom. I don’t think I need to find out :-)

Marthin Stout -

подскажите где можно купить шлейф на контроллер кнопок, и весь корпус

Денис Мирный -

My JBL Charge 2+ now makes a crackling and high pitched fart-like sound when music is played, at first i thought it was the audio drivers that were faulty but I pulled them out and tested on another player and they were playing music just fine, meaning it is a board problem but I do not know which of the three boards is faulty so that I replace it. I see (1) the function board with led light, (2) the motherboard in the middle and (3) the power board with audio jack and USB ports, so I do not know which board to replace. Any assistance will be appreciated.

Lyon Bassey -