JD Razor 2000 Front Wheel Replacement

Geschrieben von: Kaylan Naicker
  • Kommentare: 0
JD Razor 2000 Front Wheel Replacement

Schwierigkeitsgrad

Easy

Schritte

2

Zeitaufwand

5 - 15 Minuten

Einleitung

The front wheel of the JD Razor 2000 is located directly underneath the handlebar and T-Bar.

  1. bajEEIgMwJsZ3o5N
    bajEEIgMwJsZ3o5N
    YDFyXd2kWOCQyKDe
    FJlVcQNLfTNYpTVt

    • Orient the scooter so that the front wheel is facing you. Observe the right and left side of the wheel. Remember which is which throughout the guide.

    • Using an Allen wrench, unscrew the axle bolt slowly from the right side while applying a constant pressure with your hand on the left side of the bearing.

    • If the left side of the bolt turns while you unscrew the right side, you will need to use a second Allen wrench to prevent it from moving

    • If the bolt does not move at all, or moves very little, try applying a lubricant on as much of the screw as possible and try again in 5 minutes.

    • Carefully pull apart the bolt and bearing from either side of the wheel.

  2. qAKvlqbAIH6AA6hH

    • Grip the bottom of the wheel and gently slide it out.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Kaylan Naicker

Mitglied seit: 14/10/14

255 Reputation

0 Kommentare