JD Razor 2000 T-Bar Replacement

Geschrieben von: Shane
  • Kommentare: 0
JD Razor 2000 T-Bar Replacement

Schwierigkeitsgrad

Easy

Schritte

4

Zeitaufwand

20 - 35 Minuten

Einleitung

The T-Bar allows you to steer and control your scooter. This guide will show the replacement of a T-Bar.

  1. HJh1si6Lmttyhpiw
    HJh1si6Lmttyhpiw
    VCFPdTQTyN3ckJVg

    • Unlock the quick-release lever by turning the lever from a tightened position.

  2. MODeAr4RBYSJIYdv
    MODeAr4RBYSJIYdv
    Kwf1CSMKJMueWE3n
    dEoYpNGVFbUmiZ5x

    • Use a 7/32" Allen Wrench or T25 Screwdriver to loosen the screw shown.

    • Be sure to fasten the opposite side of the screw before unscrewing.

    • Remove the screw and note the order of the parts for reassembly.

  3. wVfI4DkpPfcWrDAl
    wVfI4DkpPfcWrDAl
    oRDNqEpjo5qIQUqt
    LwS3FADAuCFwgsI5

    • Turn the quick-release lever over to reveal an 8mm screw.

    • Use the Phillips #2 screw driver to remove the screw.

    • After removing the screw, the circular latch will be detachable.

  4. nWCbNHOZPWjawyQL

    • After disassembling the Quick-Release Lever, the T-Bar is removable

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Shane

Mitglied seit: 19/10/14

384 Reputation

0 Kommentare