Einleitung
The wheelie bar may be deformed or just get in your way constantly. Learn how to remove and/or replace it with this guide.
If you need more assistance, visit our troubleshooting guide here.
Werkzeuge
-
-
Facing the wheelie bar as shown, place your left thumb on the bolt located on the left side of the back wheel and place the Allen wrench into the screw on the right side of the back wheel.
-
Using the wrench, slowly unscrew the bolt while applying constant pressure from the left side.
-
-
-
Turn the JD Razor 2000 on its side as shown. Slowly remove the back wheel by pulling it out at a perpendicular angle to the scooter base.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
If you need more assistance, visit our troubleshooting guide here.
