Kenmore 110 Series Washing Machine Water Pump Replacement

Geschrieben von: Robert Trout
  • Kommentare: 4
Kenmore 110 Series Washing Machine Water Pump Replacement

Schwierigkeitsgrad

Moderate

Schritte

2

Zeitaufwand

15 - 30 Minuten

Einleitung

Use this guide to replace a faulty water pump on your Kenmore 110 Series Washing Machine.

  1. pNY6e2qdN3ZZt3g4

    • Unplug the washing machine!

    • Carefully lay washing machine on its back.

  2. JV1yccwY3hY3dppm
    JV1yccwY3hY3dppm
    DC2UJ1YClBgpEdtK
    H6r54pYo6fZhsQCD

    • Carefully remove both wire harnesses connected to the pump.

    • Squeeze and pull back hose clamp.

    • Twist drain hose off of pump.

    • Using a 1/4" socket wrench, remove the three mounting screws.

    • Pull the pump out of place.

    • Pulling the pump away takes a little force.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Robert Trout

Mitglied seit: 27/09/12

1153 Reputation

4 Kommentare

i have a speed problem with my washer ...

http://tristaterepairs.com/dryer-repair....

Andre Matthew -

please provide info on how to test the water pump once it's removed...

Oscar Ramos -

The instructions say nothing of the pulley belt and wheel.

I'm looking to work on a 110. 81080100

and

I have read that transmission fluid leaks out when the washer is on its side.

Is there a way to temporarily plug it?

thomas -

My clothes are still really wet.

Tracy Schultz -