Kensington Hi-Fi Headphones 33137 Speaker Ear-Pad

Geschrieben von: William Sanders
  • Kommentare: 2
Kensington Hi-Fi Headphones 33137 Speaker Ear-Pad

Schwierigkeitsgrad

Easy

Schritte

4

Zeitaufwand

7 Minuten

Einleitung

The speaker ear-pads on the Kensington Hi-Fi Headphones 33137 provide comfort for the user when listening to the headphones. This guide shows how to remove these components.

  1. qdBLV4aNM2wTKPWw
    qdBLV4aNM2wTKPWw
    pVRIU1MPBRtEXbSv
    NshIwl1S5gtwlOno

    • Starting with the left speaker first, pull out one side of the speaker clamp where the clamp enters the hole on the speaker cover.

    • Do not pull out the speaker clamp with too much force, or it may break.

    • After one side of the speaker clamp is removed from the speaker cover, pull the other side of the speaker clamp out.

  2. DUCZhUfnqIg5f3fB
    DUCZhUfnqIg5f3fB
    ZBST5hXKpnrSZNY2
    WyarBMCOfBAfdR2T

    • Repeat the process in Step 1 to remove the right speaker clamp.

  3. vIRRDP3RXEdvQjQk
    vIRRDP3RXEdvQjQk
    xtHXD5EuHkSO5gKN
    HMYIjsYEJ6kRU2x6

    • Hold the speaker cover in one hand and the speaker ear-padding in the other.

    • Turn the speaker cover counter-clockwise until it stops turning.

    • Pull the speaker cover and the speaker ear padding apart to expose the inner components of the speaker.

    • Make sure to pull the speakers apart gently to avoid disconnecting the speaker cable wires from the speaker.

    • If the speaker cover and ear-padding don't easily come apart, then make sure the speaker cover is fully turned.

    • Repeat this process for both speakers.

    Hey could you respond to me ask quickly as you can please how do you put it back on?

    dewer -

    Hi but i’m in a sticky situation how do you put it back on please help me

    dewer -

  4. EnKOhLWeZEXA42D6
    EnKOhLWeZEXA42D6
    i3cPNNEUnRsccxlm
    GASSo3hArKbyhG6I

    • After the speaker cover has been removed, hold the edge of the speaker ear-pad with fingers.

    • Gently pull the edge of the speaker ear-pad around the edge of the speaker.

    • To avoid tearing the speaker ear-pad, don't use too much force when pulling it around the edge of the speaker.

    • Repeat this process for the other speaker ear-padding.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

William Sanders

Mitglied seit: 26/03/14

573 Reputation

0 Kommentare