Keurig B60 Handle Replacement

Geschrieben von: Jake Wynn
  • Kommentare: 3
Keurig B60 Handle Replacement

Schwierigkeitsgrad

Moderate

Schritte

3

Zeitaufwand

Keine Schätzung

Einleitung

This replacement is recommended if the Keurig Handle is damaged and/or unable to open the Pack Holder.

  1. rNuOhPDSbBBPYjCT

    • Lift the handle

  2. AYaCMGrDcYQXiJvK
    AYaCMGrDcYQXiJvK
    YKtHeWwQQONLyG2W
    YHpSIB2lGXSshTni

    • Locate and remove the two 9.5 mm Torx T15 screws on both sides of the handle.

  3. ku5c2iZFkSEkR5cJ
    ku5c2iZFkSEkR5cJ
    orUT5abIQvqyWslF

    • Remove the broken handle and replace with the new one

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Jake Wynn

Mitglied seit: 12/04/16

830 Reputation

3 Kommentare

The handle is locked up, partially ajar. Inserted a k-cup and handle locked when I was pulling it down

Meme Hill -

Handle is locked in a partial open position. I raised handle, inserted-cup and when the handle

was pulled down it locked halfway down and does not move

Meme Hill -

I also have a similar problem as Meme Hill, where the k cup area jostles and jams to an awkward position when moving the handle up (it cannot go up all the way), and it prevents full access to k cup, but I don't know why or what is preventing proper operation of handle swing. My current work around is keep on trying opening and closing, and eventually the handle can open all the way, and the k-cup area part swings out, but it really annoying. It should be accessible the first time when putting the handle up.

Lisa Munn -