Einleitung
To get to the spring the K-cup assembly housing, the lid, and the water pump will need to be removed.
-
-
Using a Phillips #2 screwdriver unscrew two 2mm screws.
-
Once the screws are out, lift up and squeeze the k-cup assembly housing to take it out.
-
-
-
Using the Phillips #0 screwdriver unscrew two 2mm screws on the water pump.
-
Once unscrewed lift the water pump up and pull and twist it off.
-
-
-
Using the tweezer and the plastic opening tool grab the front of the spring to take it off.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
