Kindle Touch Battery Replacement

Geschrieben von: Adam Yerly
  • Kommentare: 3
Kindle Touch Battery Replacement

Schwierigkeitsgrad

Easy

Schritte

4

Zeitaufwand

5 Minuten

Einleitung

Use this guide to replace an old or faulty Amazon Kindle Touch battery. The battery may be due for replacement if your Kindle runs out of power quickly, won’t work unless plugged in, or won’t charge.

Make sure the device is powered off and disconnected from all external power sources before beginning this process. Please dispose of electronic waste responsibly.

  1. HTnRmaKcPUqhJN2S
    HTnRmaKcPUqhJN2S
    PASaJ33EXJWRCpwQ
    SV4hXsVNZqyy1LNG

    • Use the plastic opening tool to undo the ten plastic clips around the back panel of the Kindle.

    Wear work gloves as the tool can easily slip and stab you in the hand.

    BRUCE -

  2. 3Ad5BKbISCIUnD3P
    3Ad5BKbISCIUnD3P
    KgMp3ZxIO3rjZrsK

    • Gently lift the bottom and slide the panel off.

    There are four tabs on each side.The two nearest the top are open at the top, hence they slide out (back towards the power connector end.

    This is important in the reassembly stage:

    1. Align the back cover about 0.75 cm away from the top

    2. Hold the top half of the cover flat against the unit, and flex the cover away from the case a little at the bottom

    3. Slide the top and the first two clips parallel to the case

    4. snap the remaining bottom clips in place

    John Haywood -

  3. AekhLDwNenFqZHDE
    AekhLDwNenFqZHDE
    BkLQYEor6bRPyiIB
    tkvGp5mMiCQOaU1I

    • Use a Phillips #00 screwdriver to remove the five screws.

  4. X4tY65W6kjyWVNmc
    X4tY65W6kjyWVNmc
    VoEHW6iSUJSUA2Ym
    pNPxayDDIyXIpFcP

    • Using the flat end of your spudger, gently pry the battery up and remove it.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Adam Yerly

Mitglied seit: 20/01/15

1885 Reputation

Ein Kommentar

Where can I buy a new battery?

Carla Grobler (Ubbink) -