Kodak EasyShare C713 Battery Door Replacement

Geschrieben von: Trevor DeVore
  • Kommentare: 1
Kodak EasyShare C713 Battery Door Replacement

Schwierigkeitsgrad

Easy

Schritte

5

Zeitaufwand

10 Minuten

Einleitung

Use this guide to remove and replace the battery door.

  1. 4uiFYrBiQNCAb4oj

    • Use your finger tip to slide battery cover door away from the center of the camera.

    • The battery door should spring open.

    • If this does not happen, gently open the door lifting from the outer bottom side of the camera.

  2. vGKAywwVpR5UhdMg

    • Remove the old batteries.

  3. evtHFhc3TLQUtn6X
    evtHFhc3TLQUtn6X
    RLHgmVAmsAqvKaUQ
    sWUjwSbYBdoZR6vN

    • Remove the seven screws from the outer case with a Phillips #00.

    • All screws are 4.45mm.

    • There are 2 screws on the port side.

    • There are 2 screws on starboard side.

    • There are 3 screws on the bottom.

  4. CEIriBaQl6KgVvIZ
    CEIriBaQl6KgVvIZ
    S2CCFTLcnCNvbVOm
    mEjCSRxFsNNnSTIg

    • Make sure the battery cap is "up".

    • Pull the outer case off with your hands.

  5. YXkMPWbBBuVTCopD
    YXkMPWbBBuVTCopD
    cTHP1ddjrx2SiYhD

    • Make sure the battery door is open.

    • Using a pair of tweezers, remove the metal rod at the junction of the battery door and the inner camera case.

    • This rod serves as the hinge for the door.

    • Make sure not to lose the battery door spring which may fall when the rod is removed.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Trevor DeVore

Mitglied seit: 15/04/10

17 Reputation

Ein Kommentar

Where do I buy a new battery door. Cheers, Peter

Peter -