Kodak EasyShare M2008 Device Casing Replacement

Geschrieben von: Kyanna
  • Kommentare: 0
Kodak EasyShare M2008 Device Casing Replacement

Schwierigkeitsgrad

Moderate

Schritte

5

Zeitaufwand

15 Minuten

Einleitung

  1. pGaQBnD1oJWN1c1P
    pGaQBnD1oJWN1c1P
    OvWfZAcGKjp2lBTD

    • Place thumb firmly on battery cover.

    • Slide thumb right, the cover should follow and pop up.

  2. dNXTBrmScmjIuyyp
    dNXTBrmScmjIuyyp
    cdqyFUE4xluqGoLk

    • Place thumb on orange tab and pull back towards screen.

    • The battery should pop up.

    • Gently lift battery out.

  3. lODeyTKFJLnXTsFZ
    lODeyTKFJLnXTsFZ
    eelLeVsYPneWZq4B
    cQSDJTOIs2eiKGLJ

    • Remove screws from along outer edge of casing.

    • There are 6 screws in total.

    • Righty tighty, lefty loosey!

  4. DsG2LCfoRWfXdNHl
    DsG2LCfoRWfXdNHl
    NLMjZxghanRiRqYF
    ZRYeIeHndCKRJseo

    • Gently lift off front and back casing.

  5. oJ6mbLgVIFaGNuoJ
    oJ6mbLgVIFaGNuoJ
    ZiAFylNpGUKehfdN
    e1wiVykvvMuGwjlx

    • Remove screws along side.

    • Gently peel off side casing.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Kyanna

Mitglied seit: 13/03/14

313 Reputation

0 Kommentare