Kodak Easyshare V1003 Button Replacement

Geschrieben von: Vanessa Soares
  • Kommentare: 0
Kodak Easyshare V1003 Button Replacement

Schwierigkeitsgrad

Moderate

Schritte

8

Zeitaufwand

Keine Schätzung

Einleitung

This guide provides step-by-step instructions for removing and replacing the battery. There are two tools required and no safety precautions needed.

  1. rEcv6wNxNUX52V1U

    • Turn off camera by firmly pressing the power button that is located on the top of the camera.

  2. bNIyGBKXZFpPYScq

    • Position camera with the bottom facing up.

  3. VBMfkJ4p5mhTvFdg

    • With your finger, slide the battery cover in the direction of the open arrow.

  4. Mi4H5Mjj6maEBbAX

    • Lift the battery cover up gently.

  5. HbRo3vfBFZQXkVjh
    HbRo3vfBFZQXkVjh
    cJrwG4WByXFhsvHm

    • Gently push the battery down until a click is heard. Battery should release and be lifted out of slot.

  6. K2jn1sSo32rmTZCp
    K2jn1sSo32rmTZCp
    IGojiQZYVKZU2eb2
    wQoickv1no4TmguF

    • Use a J00 screwdriver to remove the five exterior screws.

  7. OTivqBaSkXkCstcL
    OTivqBaSkXkCstcL
    tfGOpSgCG4Uwlis1
    bIfTLSTOTC5JuMMy

    • Use a plastic opening tool to pry off the back casing.

  8. egSXebJa2HDtLnGJ
    egSXebJa2HDtLnGJ
    WtLI1IxUBv3VX1gQ
    nIwf6cmcfhY1e1oK

    • Completely remove the back casing from the device.

    • Using a plastic tool to remove the bottom.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Vanessa Soares

Mitglied seit: 16/03/17

222 Reputation

0 Kommentare