Einleitung
Replacing the cameras if either are broken or not functioning properly.
Werkzeuge
-
-
Insert the spudger into the notch on the bottom left side of the phone.
-
Apply light pressure to remove the back cover.
-
-
-
Insert the spudger into the notch located on the bottom middle of the battery.
-
Apply light pressure to remove the battery.
-
-
-
Use the PH000 bit unscrew the ten 3.4mm screws as highlighted.
-
Use the spudger to remove the inner shell.
-
Flip the inner shell over to expose the clips holding the command button.
-
-
-
Use the spudger disconnect the three clips holding in the command button as highlighted.
-
Remove the command button.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.