Einleitung

Replacing a faulty motherboard is simple, but time consuming.

  1. uQQLLiQGlXLUZEgN
    • Apply an upward force to slide the back cover off.

  2. 46sSMLiX3VOC2tNn
    • Use your finger to push down on the top of the battery and pull it out.

  3. BiIGW3QfOQaNv5Dk
    • Remove the five 3.0mm Phillips #000 screws along the edge of the rear case.

  4. FujYESQLKTLygCAu
    • Use a plastic opening tool to pry the rear case loose.

  5. 2QsAP6pwPj6Wabdl
    • Once the rear case is loose, lift it from the rest of the phone.

  6. jyHcJrOeccvhOlCr
    • Remove the two 2.9 mm Phillips #000 screws that are slightly off-centered to the right.

  7. i4YH63yDVByKoNv4
    • Use the plastic opening tool to pry the motherboard loose.

  8. uDXObkfqdlaZAiQI
    • Hold the motherboard from the top and bottom and slowly lift the motherboard until you feel a pull.

    • The flex cable is attached at the bottom of the motherboard and can be damaged if too much lifting force is applied.

  9. LSOZDkGnHtUHGSFO
    • Once the motherboard is lifted , rotate the motherboard up 90 degrees to the right.

  10. Y2E3OFpT1RJpwXJW
    • Use your finger to pull the flex cable out from its connector.

  11. XERYFpwC6sJJKZQO
    • Pull the motherboard away from the rest of the phone.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Johnny Phane

Mitglied seit: 16/04/13

70 Reputation

0 Kommentare