LG G Pad 7.0 LTE Front Facing Camera Replacement

Geschrieben von: Fadi Bitar
  • Kommentare: 0
LG G Pad 7.0 LTE Front Facing Camera Replacement

Schwierigkeitsgrad

Easy

Schritte

8

Zeitaufwand

1 - 10 Minuten

Einleitung

In cases where the front facing camera is not responding or isn’t powering on, this guide will help you replace the camera to fix these issues.

  1. eO2gKJHGM3XqmyLG

    • Power off your device before beginning the battery replacement (hold the button with the red marker until the device prompts you to power it off, then tap "Power Off").

    • Be wary of the front screen and SIM Card while tearing down the device.

  2. LDuunMQB4tX5gG3n

    • Put on an Anti-Static Wrist Strap to prevent damage to sensitive electrical components (optional).

    • To separate the frame from the cover, pry between the screen and the cover using a plastic prying tool.

    • Begin at the top left of the device to avoid damaging the motherboard and work your way around the perimeter of the screen.

    • When you pry your device open, be wary of the volume rockers, motherboard, and camera. These components are delicate and can be sensitive to static electricity.

  3. JOxOeEye3p3p1P14

    • Disconnect the battery connector by prying it upwards (red marker).

    • Be careful not to damage it while doing so.

    • Remove the ribbon cables by prying them upwards with a plastic pry tool ).

    • Do not bend the cable or connector as they are fragile.

  4. HDYexW5oCAoGYwM3

    • There is a light adhesive holding the camera in the device.

    • Using tweezers or a small plastic pry tool gently pull or pry the camera out of the device.

  5. etBuCSSfnlfeqRuW

    • Pry the audio jack from the device using a spudger.

  6. 1vCTlbPUnPyc56OI

    • Remove the 7 Black 3mm PH0 screws from the motherboard (red markers).

  7. fVkHYLlxqAC64VxL

    • Remove the Motherboard.

  8. F5ErQAZ65g1cfAyK

    • Gently pull up on the camera to remove it.

    • There is a light adhesive holding the camera in the device

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Fadi Bitar

Mitglied seit: 26/09/16

880 Reputation

0 Kommentare