Einleitung

This guide will cover how to replace the motherboard on the LG G Pad 7.0

  1. eBlkMeYERLYIDEXF
    eBlkMeYERLYIDEXF
    YQAFufAGWHZR5VSj
    • The screen assembly is secured to the plastic backing with clips. Insert the plastic opening tool between the screen and plastic.

    • Work your way around the device, freeing it from the connecting clips.

    • Be careful around the MicroSD, sim card, power, and volume buttons

    • Lift the tablet from the plastic frame. You may need to loosen some more clips if it is difficult to remove.

    Ich habe die Öffnung mit einer zugeschnittenen Kreditkarte hinbekommen. Ein ca. 3 cm breiter Kartenstreifen reicht.

    Joachim Kaube -

  2. QI6VUyMG3tEVpr3K
    QI6VUyMG3tEVpr3K
    2nVtfkUM1IKFG1Md
    wYL6p2WIIjCUrPZZ
    • Remove the red marked connectors by gently prying up. Be sure not to rip the ribbon cables as they are very fragile.

    • You will have to remove the metallic tape near the bottom of the tablet to disconnect the display cable.

    • Remove the three connectors marked in orange by gently prying them upwards. The cables are very fragile so be careful not to rip them.

    Beim Displaywechsel reicht es aus, die untere rote Verbindung zu lösen. Dann weiter mit Schritt 6.

    Joachim Kaube -

  3. nfDfFfTqwvCNiPLd
    nfDfFfTqwvCNiPLd
    Q5KeZZXKCQOvNAD3
    • Remove the 7 screws marked in red that are securing the logic board to the case.

    • Be sure that all the connectors marked in orange are removed before pulling out the mother board.

    • Very carefully remove the logic board after the screws have been removed

  4. ZqxfXgpDLdMyjspJ
    ZqxfXgpDLdMyjspJ
    KaMZaIVUAEPhbdJ3
    rL1TrKwJDWUK5Bpw
    • Remove the two screw marked in red.

    • Using the tweezers , pull out the metal bracket that holds the charging port in place.

    • Pull out the ribbon connector in orange.

    • Remove the one screw that holds the speaker in place.

    • Slowly pull out the speaker.

  5. KCwqbgWXBTnkEZx4
    KCwqbgWXBTnkEZx4
    1RBBjkYCqLvMhfiu
    • Insert your new mother board with the 7 screws

    • Reconnect all the connectors marked in red back to the mother board.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ethan Chow

Mitglied seit: 05/09/15

2100 Reputation

0 Kommentare