LG G Pad 8.3 Back Panel Replacement

Geschrieben von: Raenicia Haworth
  • Kommentare: 0
LG G Pad 8.3 Back Panel Replacement

Schwierigkeitsgrad

Moderate

Schritte

3

Zeitaufwand

5 - 15 Minuten

Einleitung

If you need to replace a component inside the LG G Pad 8.3, you will need to remove the back panel. This guide will teach you how to remove the back panel.

  1. sOJUcVTNoWWtVGDR
    sOJUcVTNoWWtVGDR
    eM32UNGNWqgmFWva

    • With the tablet face down, pull the SD card slot cover out.

    • Using a Phillips #000 screwdriver, remove the 3mm screw located in the SD card slot.

  2. qDRkREMwYUAkwGQX
    qDRkREMwYUAkwGQX
    NT4FQU2PqhmRBfGS
    RcAxS1nRODfFM5bu

    • Insert a plastic opening tool in the small crevasse between the screen and the back panel.

    • Pry the screen away from the back panel.

    • Repeat this on each edge of the device.

    • We found it helpful to leave multiple plastic opening tools wedged in the crevasse to prevent it from closing.

    • This requires heavy force. The back of the device is attached with an adhesive. If the back panel is too hard to remove, use the iOpener.

  3. ko5XAEW4Ivc3xRJN
    ko5XAEW4Ivc3xRJN
    QkkrZPVEyrauxxOt

    • After using the plastic opening tools, pry the device open with your hands.

    • Remove the back panel from the screen.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Raenicia Haworth

Mitglied seit: 14/09/15

381 Reputation

0 Kommentare