LG G Pad 8.3 Volume Control Buttons Replacement

Geschrieben von: Mario Salguero
  • Kommentare: 0
LG G Pad 8.3 Volume Control Buttons Replacement

Schwierigkeitsgrad

Easy

Schritte

4

Zeitaufwand

10 Minuten

Einleitung

If your volume control buttons are not working properly, it may be time to replace them. This guide will show you how to replace the volume control buttons.

  1. sOJUcVTNoWWtVGDR
    sOJUcVTNoWWtVGDR
    eM32UNGNWqgmFWva

    • With the tablet face down, pull the SD card slot cover out.

    • Using a Phillips #000 screwdriver, remove the 3mm screw located in the SD card slot.

  2. qDRkREMwYUAkwGQX
    qDRkREMwYUAkwGQX
    NT4FQU2PqhmRBfGS
    RcAxS1nRODfFM5bu

    • Insert a plastic opening tool in the small crevasse between the screen and the back panel.

    • Pry the screen away from the back panel.

    • Repeat this on each edge of the device.

    • We found it helpful to leave multiple plastic opening tools wedged in the crevasse to prevent it from closing.

    • This requires heavy force. The back of the device is attached with an adhesive. If the back panel is too hard to remove, use the iOpener.

  3. ko5XAEW4Ivc3xRJN
    ko5XAEW4Ivc3xRJN
    QkkrZPVEyrauxxOt

    • After using the plastic opening tools, pry the device open with your hands.

    • Remove the back panel from the screen.

  4. MWU3fiLLK42VIJMP
    MWU3fiLLK42VIJMP
    of3YKmtRgASKAjDI

    • With the screen facing towards you and the top of the tablet towards your left, locate the volume buttons on the left side.

    • Using a spudger or your hands, remove the volume control buttons, which are attached with adhesive.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Mario Salguero

Mitglied seit: 14/09/15

781 Reputation

0 Kommentare