Einleitung

  1. bJBeUKVHMrSD1iMr
    • Remove the back cover by placing your fingernail in the crease between the cover and the charging port.

    • Pry upward and the cover should pop off easily.

  2. s1snY4QsgcDMEQdQ
    • Remove the battery from the battery bay by prying with your finger at the groove on the lower end of the battery bay.

  3. 1vywRxpHCuAclTry
    1vywRxpHCuAclTry
    Al5hSVT12SkF16KH
    • Locate 10 screws and remove each one using a Philips head screw driver.

  4. 54D4wGyFBDhe6mfH
    • Use a plastic spudger tool to pry away the cover by placing it between the cover and the phone.

    • Pry all the way around the phone about every centimeter until the cover is completely separated from the phone.

  5. KxQUFeLo1titpCjB
    KxQUFeLo1titpCjB
    bjtbOqGrQoBpuGei
    CulBfOKaNHuG2xMr
    • Locate the front facing camera.

    • Pry the ribbon cable off of it's connector using the plastic spudger tool or a flat head screwdriver.

    • Use your finger to remove the camera.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Aung Myin Thu Mayet

Mitglied seit: 29/10/14

641 Reputation

0 Kommentare