LG G3 Vigor Headphone Jack Replacement

Geschrieben von: Geoff Wacker
  • Kommentare: 1
LG G3 Vigor Headphone Jack Replacement

Schwierigkeitsgrad

Moderate

Schritte

10

Zeitaufwand

Keine Schätzung

Einleitung

Use this guide to replace the headphone jack in your LG G3 Vigor.

  1. WjLIQAEM54VEf3uf

    • Locate the notch on the bottom right of the phone.

  2. Y3gtdpKySy1ViZcL

    • Gently pull the cover on the back of the phone off to locate the battery.

  3. 1qJImBsdqAAydsAs

    • Remove the battery by lifting from the slot at the bottom of the battery.

  4. pGTBpsOQkqR6YYMK

    • Remove the twelve Phillips #00 screws securing the midframe to the rest of the phone.

  5. hexypD6N2F2kyHkX
    hexypD6N2F2kyHkX
    UFt4qkdx4rokMMM1
    AJvJAgphqcWgyX4l

    • Work a plastic opening tool around the perimeter of the phone to separate the midframe from the rest of the phone.

  6. RsCW4lZATsCN54Sb

    • Use the spudger to gently unplug the ribbon cable connected to the motherboard. Then remove the rear facing camera.

  7. SeeNT4NsDfW3uKqf
    SeeNT4NsDfW3uKqf
    hRJmqTBWkiUnkcit

    • Use the spudger to gently unplug the ribbon cable connected to the motherboard.

    • Remove the front camera.

  8. Q6Rh6p5qWjaVIKQK

    • Use the flat edge of a spudger to disconnect the motherboard ribbon connector.

  9. skcPo5FNShyKlGQh
    skcPo5FNShyKlGQh
    juSuKB45m5TZ1MfN

    • Use the pointed end of a spudger to push back the two motherboard retaining flaps.

    • The motherboard should now be able to be lifted out of the device.

  10. Sx1UDlB4JCLDMoIe

    • Remove the headphone jack by inserting the spudger into the jack and pulling it up and out.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Geoff Wacker

Mitglied seit: 30/09/13

88019 Reputation

Ein Kommentar

Works also with D855. There are only a view differences, e.g. screws and a minimal different motherboarddesign.

flux -