LG GW910 Motherboard Replacement

Geschrieben von: Jonas Ke
  • Kommentare: 0
LG GW910 Motherboard Replacement

Schwierigkeitsgrad

Easy

Schritte

7

Zeitaufwand

5 Minuten

Einleitung

This guide will assist you while you take your phone apart. This disassemble is not a very difficult task. There will be a few connectors that will be disconnected during the process. Make sure to be cautious with them so they do not rip. There are many little screw that will be taken off the phone. Make sure that you have a clean and organized work space.

  1. PSNGOeAIrRMMLrnM
    PSNGOeAIrRMMLrnM
    C1ptsTGC1wdXxwBR

    • Remove the back cover by firmly pressing the triangle and push upwards.

    • Lift the bottom section to remove the cover.

  2. BSjJCdqCFIuoarla
    BSjJCdqCFIuoarla
    3ApZgCOxSQKGtoum

    • Remove the battery by lifting from the bottom.

  3. BIMhARwDJGvoD32W

    • Remove six 3mm PH000 screws.

  4. X3oxmnbWUkkSjVTH
    X3oxmnbWUkkSjVTH
    Ag4vKnqvdYpdQwkn
    JJ36GR5Cd5VquROj

    • Peel off the sticker with the metal spudger.

    • Remove one 1mm PH000 screw.

  5. XqtracPQLFyIaIGO

    • Pry open all four sides of the back-frame gently, using the metal spudger.

    • The back-frame should come out easily.

    • Volume button and shutter button may fall out during the process.

  6. gLEFCkRdZKGuPrFS

    • Pry off the connector using the iFixit opening tool to remove the communication board.

  7. pRcOXXYZRGiQWXcH
    pRcOXXYZRGiQWXcH
    IxlC13dCfZOyBVZp
    fH3qAsWQMMWtki1j

    • Pry off the connectors using the iFixit opening tool.

    • Disconnect the antenna using the iFixit opening tool.

    • The motherboard should be able to be removed easily.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Jonas Ke

Mitglied seit: 06/11/18

492 Reputation

0 Kommentare