LG K20 PLUS Volume Buttons Replacement

Geschrieben von: Patrick

Schwierigkeitsgrad

Moderate

Schritte

Zeitaufwand

Keine Schätzung

Einleitung

Remove the back cover by inserting a fingernail or opening pick here and disengaging the plastic clips.
Lift battery up here

Use fingernails or insert an opening pick into the gap between the digitizer and the midframe and pull the midframe outwards to disengage the plastic clips.
Carefully disengage the clips on the bottom as the headphone jack goes through the midframe.
Once all the clips have been disengaged, move the midframe outwards and downwards to disengage it from the headphone jack.

Use a Halberd spudger or an opening pick to disconnect the front camera flex from its connector on the motherboard.

Using the tip of a Halberd spudger or an opening pick, disconnect the display flex cable from its socket on the motherboard.
Starting from the bottom, insert an opening pick between the motherboard and frame and lever apart.
Be careful not to break the long section of the motherboard.
The top part of the motherboard is lightly adhered to the frame.
After the motherboard is removed, compare the original and replacement part. Some components may already be installed on the replacement display assembly.

There is no adhesive that holds down the mother board here. There are however three plastic clips on the mid-frame that hold it down.

I used a razor blade tool to gently pry them over to release the motherboard.

The volume button assembly is held onto the frame with fragile plastic tabs.
Use the tip of a spudger or similar tool to gently pry the plastic tabs upwards and outwards.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Mitglied seit: 14/05/14

6439 Reputation