Einleitung

  1. LJWpHesFYDePeZKl
    LJWpHesFYDePeZKl
    Kg6pQxiHbMUYLWn1
    • Use an iopener to open the back panel and remove it...there will be glue...

  2. cy22wOPslRKgXEyZ
    cy22wOPslRKgXEyZ
    flnab1U5Ck1rePQF
    • Unscrew the screws holding the motherboard cover on...there should be

  3. bLDTZTeKb5f5NWmy
    bLDTZTeKb5f5NWmy
    N5UYPFr2O6bZH5DW
    • Remove the motherboard cover and apply adequate pressure because there is some resistance.

  4. RkLFGx1K1bJTSeug
    RkLFGx1K1bJTSeug
    ggP6usqUDUFaqHW1
    • Disconnect the yellow ribbon cable connector that connects the battery to the mother board. Make sure to use plastic to remove the battery and pull up on it to break the glue also pull battery pull tabs correctly.

  5. yqGYLg6so6nM2rQ4
    • Reconnect the new battery by connecting the ribbon cable connector back to the motherboard.

  6. EPTJODQIYdCnZ4Su
    EPTJODQIYdCnZ4Su
    SAGwwBZJUXtYVLqu
    • Repeat steps backwards from step 3 to reassemble the phone.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Rose Schneider

Mitglied seit: 01/05/21

413 Reputation

0 Kommentare