Einleitung

How to replace the phone's soft keypad.

  1. TZHsPhem64JhmBmO
    • Press button labeled "Push". In the photo depicted the button is being depressed by the left finger.

    • Pull back panel toward bottom of phone.

  2. LW1LCQXkOBNWCGvq
    • From the lip on the top of the battery, lift it out of the phone.

  3. UeTS4Txh5KxNXDZQ
    • Remove the 4 small screws from the back panel, under the battery, using 00 Phillips-head.

  4. Oo2p1hd6mqRbK5Rl
    • Starting at the top of the phone near the antenna, use a screwdriver or other small tool, maybe even fingernails, to pry the rear panel off.

    • There are 4 places where the panel snaps together to the main part of the phone.

    • By systematically prying up the edges of the back panel, moving about a quarter of an inch, and prying again, the panel will begin to lift off.

    • Don't be afraid to damage anything, the panel requires a bit of force to detach.

  5. sWG2hP2YmAIXPkVY
    sWG2hP2YmAIXPkVY
    jZHBSvMNLYN5JfUi
    • The logic board is only held on with 4 tabs and a data cable in the top right. Simply pry from one side using a screwdriver, popping out the board, before lifting the display data cable.

  6. oVXWQGaNyi1dnUTt
    • Lift the keypad up from beneath the logic board.

    • It is not glued or secured in any way, so it should come away easily.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Bradley Hutchinson

Mitglied seit: 20/01/10

42 Reputation

0 Kommentare