Einleitung
The front keypad suffers a lot of wear-and-tear, but can be easily replaced. This guide will show you how to remove the old keypad so that you may install a new one.
Werkzeuge
-
-
Remove the two triangular pads at the top of the two speakers.
-
These pads have adhesive to keep them situated, so you may want to use a fine-tipped object, such as a screwdriver or a pen, to remove them. It is easiest to place the fine-tipped object in the small indent in the corner of these pads.
-
-
-
Remove the two rubber cylinders from their shafts. These cover more screws.
-
This requires a little more effort, so you may need to "dig" them out.
-
-
-
Starting on the side with blue square, pry the faceplate upwards with the flat end of a spudger.
-
Continue to slide the flat edge along the seam of the faceplate.
-
-
-
The faceplate is still attached through speakers that travel from the ear-piece to the motherboard.
-
Carefully wedge the flat or pointed end of the spudger beneath the ear-piece and the faceplate.
-
This may require a bit of force, as the ear-piece is stuck to the faceplate with adhesive.
-
