LaCie Rugged USB-C Circuit Board Replacement

Geschrieben von: Bobrobot1
  • Kommentare: 2
LaCie Rugged USB-C Circuit Board Replacement

Schwierigkeitsgrad

Moderate

Schritte

8

Zeitaufwand

15 Minuten

Einleitung

  1. RN3k615fDQlHQTEW
    RN3k615fDQlHQTEW
    1OeSkCseHEFiYhSu
    jQJJWXIWepeNtfKM

    • This guide contains steps for the LaCie Rugged USB-C. There is no guarantee that the steps will be the same for different models.

  2. NEcaQj55FlTBaiUK
    NEcaQj55FlTBaiUK
    wAABDMQlNxYDrI1b

    • Remove the rubber case around the drive. You can just stretch it off.

  3. H3oF4Ru3v1Ot5cAF
    H3oF4Ru3v1Ot5cAF
    dgHIVrJjHPRDXSkI

    • Remove these 4x Torx T8 screws

  4. qSGWYtaWQbrFEn1G
    qSGWYtaWQbrFEn1G
    jUOSF2GeY15gWygf

    • Push on one side of the drive, where the white plastic is. Which side does not matter.

  5. hbwVdU1wGdEpuYbK
    hbwVdU1wGdEpuYbK
    mMXrLObymc4nN6aX

    • Push GENTLY on the back side of the hard drive.

    • DO NOT push more than is necessary to get the drive above the white plastic, as shown in the second picture.

  6. eApkl5VO2JLyHC2t

    • Pull the drive gently out of the SATA connector.

  7. 5nmvNeZ5WFjDHOea

    • Remove this Phillips 00 screw from the board.

  8. PEL4XvaAOwGOnd4m

    • Slide the board out, making sure to keep any foam pieces intact.

    • Do not let any foam pieces get damaged. They are important.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Bobrobot1

Mitglied seit: 13/07/18

4358 Reputation

2 Kommentare

Where can i get a new board? thank you

Bar Avraham -

Yes, where can we find a new board?

Vassilis Trigkas -