Lenovo 100e Chromebook 2nd Gen Battery Replacement

Geschrieben von: Pup Washington
  • Kommentare: 0
Lenovo 100e Chromebook 2nd Gen Battery Replacement

Schwierigkeitsgrad

Moderate

Schritte

6

Zeitaufwand

5 Minuten

Einleitung

This guide will show the steps needed to take out and replace the battery in the Lenovo Chromebook 100e 2nd gen. The only tool required for this replacement is a Philips head screwdriver.

  1. gB5IPFqDRh1sOtp2

    • Remove the nine 6 mm screws from the back of the laptop using a Phillips #0 screwdriver.

  2. yoGCFDWx2qPYUHAT
    yoGCFDWx2qPYUHAT
    bZBTyGCPji6OHZts

    • Open the laptop and lay it flat.

    • Go along the edge of the keyboard with an opening tool until it pops loose.

    • Potential for device damage: Make sure that the keyboard does not fall away from the laptop, as it is still connected to the internal components

  3. wS41n6yJY1hp4GcW
    wS41n6yJY1hp4GcW
    vEBiK2JuKBC2vMJm

    • Lift the keyboard connectors up using an opening pick.

    • Remove the connectors from their sockets.

  4. PtjAvIunGsd1UoCy

    • Remove the four 4 mm Phillips #0 screws holding the battery in.

  5. cxbmPUSUOadq6OSM

    • Using an opening pick, push on the connection where the wires are connected to the motherboard.

    • Potential for device damage: This step takes some force to disconnect, but be careful to not pull the wires out of the battery.

  6. vG5YjWivhRCFcT6A

    • The battery is now loose and can be removed from the laptop.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Pup Washington

Mitglied seit: 14/01/21

582 Reputation

0 Kommentare