Einleitung

This guide will show the steps needed to take out and replace the headphone jack in the Lenovo Chromebook 100e 2nd gen. You will need a Phillips head screwdriver and a plastic pick for this guide.

  1. gB5IPFqDRh1sOtp2
    • Remove the nine 6 mm screws from the back of the laptop using a Phillips #0 screwdriver.

  2. yoGCFDWx2qPYUHAT
    yoGCFDWx2qPYUHAT
    bZBTyGCPji6OHZts
    • Open the laptop and lay it flat.

    • Go along the edge of the keyboard with an opening tool until it pops loose.

    • Potential for device damage: Make sure that the keyboard does not fall away from the laptop, as it is still connected to the internal components

  3. wS41n6yJY1hp4GcW
    wS41n6yJY1hp4GcW
    vEBiK2JuKBC2vMJm
    • Lift the keyboard connectors up using an opening pick.

    • Remove the connectors from their sockets.

  4. FjgARNffcx4WYH3L
    • Remove the three 4 mm Phillips #0 screws holding the headphone jack in place.

  5. S3UOVUJEj5iuZTK4
    • Using a plastic opening pick, remove the connection between the aux port and the speakers.

  6. eUDdihSHrdZF5LBw
    • Using the plastic opening pick, pop the retaining flap holding the ribbon cable in place.

    • Remove the headphone jack from the laptop.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Pup Washington

Mitglied seit: 14/01/21

582 Reputation

0 Kommentare