Einleitung
Use this guide if your current hard drive is damaged and needs to be replaced, or if you are simply looking to upgrade your storage.
Werkzeuge
Ersatzteile
-
-
Locate the ten 6mm Phillips screws along the edges and in the center of the back panel.
-
Remove all ten 6mm Phillips screws with a size 0 Phillips screwdriver.
-
-
-
Wedge the plastic opening tool into the small space under the back panel.
-
Use the plastic opening tool as a lever to separate the bottom panel from the computer.
-
Slide the tool along the edges of the computer until the bottom panel is completely separated.
-
-
-
Locate the three 3.5mm Phillips screws on the corners of the hard drive.
-
Remove the three screws with a size 0 Phillips screwdriver.
-
-
-
Follow the wire out from the right side of the hard drive to locate where the hard drive connects to the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
4 Kommentare
How do you reload operating system.... for example windows 10?
How do I get Windows 10 working again after replacing hard drive on Lenovo Flex 3?
arcinko -
Demo models of this do not have any SATA connector.