Lenovo Flex 6-11IGM Back Panel Replacement

Geschrieben von: Juan Palominos JR
  • Kommentare: 0
Lenovo Flex 6-11IGM Back Panel Replacement

Schwierigkeitsgrad

Easy

Schritte

4

Zeitaufwand

8 - 10 Minuten

Einleitung

If your Lenovo Flex 6-11IGM (model #: 81A70005US) has a back panel that is cracked or dented, use this guide to replace the back panel (bottom panel).

The back panel keeps the inner components of the laptop from foreign liquids and hard surfaces the laptop may encounter that could cause damage to the device. A damaged back panel could compromise the protection and safety of the inner components, therefore making it easier for the device to break.

Before beginning, make sure you power off the device, and make sure the laptop is closed for an easier and safer replacement.



  1. JQybQ3VEJaLkivw4

    • Flip the device over and lay it down with the underside facing upwards.

  2. VHdKpKITEMOIIulT
    VHdKpKITEMOIIulT
    sVADqyHHY15KxjpX

    • Remove the ten screws with a Phillips #00 screwdriver.

  3. KSqEhDCxbMQBxo2N

    • Using a plastic opening tool, make your way around the edge of the laptop.

  4. LBPTioxNFYqq4DBU
    LBPTioxNFYqq4DBU
    bEVRNpiPiMtj5Zin

    • After making sure the back panel is completely free from the body, remove the back panel.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Juan Palominos JR

Mitglied seit: 23/01/20

217 Reputation

0 Kommentare