Einleitung

If your computer won't boot and is having hard disk/hard drive reading errors, follow this guide to replace it. The guide shows how to remove the back from the device, unscrew the battery from the device, remove the drive from the dock, and unscrew the drive housing.

  1. kKlFwhmqixgUyMri
    kKlFwhmqixgUyMri
    dlZZKJJFVHGNsSAo
    • Before you proceed, make sure your computer is turned off and it's not connected to any power source. Before removing the drive, make a backup copy of all the information on it if possible. Never remove the drive while the system is operating or in suspend mode.

    • Place laptop with the bottom facing up. Using a Philip #1 screwdriver unscrew all 13 screws. Gently pry the back out using a plastic opening tool, starting from one of the corners.

    There are 3 more screws after removing dvd/cd drive

    Mazwi Mbuso -

  2. uWQZGwhFAq5MCr1C
    • Using a Phillips #1 screwdriver, remove the four (5mm) screws holding the hard drive in place.

  3. dAdEXlVdOjSLlRLj
    dAdEXlVdOjSLlRLj
    FqMvZR1RNovZDTsl
    • Do not lift hard drive straight up otherwise you might risk breaking the connection port.

    • Gently slide the hard drive away and out out of the connection port.

  4. VZiWPaeUd3uZCOC1
    VZiWPaeUd3uZCOC1
    UVhQZL2WHHPjwwRA
    • Using a Philip #1 screwdriver remove 2 screws from each side, (removing 4 screws in total) holding the hard drive into the housing.

  5. tXmQEEDBWxDOtv6h
    • Remove hard drive from housing.

Abschluss

To reassemble your device, follow these instructions in reverse order with your new replacement hard drive.

Saddam Alsinai

Mitglied seit: 18/10/17

663 Reputation

3 Kommentare

Unplug or remove battery first?

Chris Quirke -

Hard disk size?

Mohamad Mustakim -

you do not need to unplug or remove the battery

Holden Phillips -