Einleitung

If the optical drive struggles to read CDs/DVDs, or it is too noisy with a disk inside it, it may need replacement. This guide will guide you through replacing your optical drive.

The battery for this device is not easily accessible and cannot be easily removed. Before you begin your replacement, be sure to disconnect the laptop from any power source. Additionally, we recommend that you drain the battery completely before you begin this replacement.

  1. qFJCBg1KlhZmZPpw
    • Unscrew the three 6mm Phillips #1 screws from the upper back cover.

  2. GvnkKvwEwoCkNhSH
    GvnkKvwEwoCkNhSH
    FHLJRjQXeLqiScow
    CSY1nCovJtNhnUtW
    • Place the opening tool's head under any edge of the keyboard.

    • Pull upwards to unsnap the keyboard.

    • Use your fingers and the opening tool to pop the keyboard out of its place.

    • You should't use any excessive force because the keyboard is still attached to the motherboard.

    I fount that it worked best to start at the “top” of the keyboard. The lower portion had tabs into the housing

    it -

  3. IaKbO2mJSbhMYGs6
    IaKbO2mJSbhMYGs6
    XAtnB5gvF5IRBxkA
    • Push the keyboard connector latch upwards with the spudger.

    • You shouldn't use excessive force. The connector latch is very fragile.

    • The keyboard connector cable should slide right out.

  4. fRfU6x6Rwqu1HqKy
    • Remove the 6mm Phillips #1 screw that sits in the center of the front plate below the keyboard. This screw sits between two adjacent tabbed holes.

  5. 6jnIIcB1ve4FPxcv
    6jnIIcB1ve4FPxcv
    UEkYIfF2tGkAYewK
    aNgrJdwViHMjrleV
    • Insert the opening tool's head into one of the tabbed holes.

    • With the opening tool's head inserted under a tab, push to the right. The optical drive should slide out easily.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ammar Dodin

Mitglied seit: 19/01/17

1057 Reputation

0 Kommentare