Lenovo Ideapad Flex 15 Bottom Panel Replacement

Geschrieben von: Brent
  • Kommentare: 0
Lenovo Ideapad Flex 15 Bottom Panel Replacement

Schwierigkeitsgrad

Moderate

Schritte

6

Zeitaufwand

5 Minuten

Einleitung

By the end of this guide, you will be able to remove the back panel from the laptop.

  1. WsCrELRFTKA4SEaF
    WsCrELRFTKA4SEaF
    YdFWgfZwPP1ltaGR

    • Start by removing the feet near the LCD hinge of the laptop to reveal two screws.

    • Using a Phillips #1 screwdriver, remove the top five (30 mm) screws underneath the battery.

  2. cvIunLaBg6SsfXeH
    cvIunLaBg6SsfXeH
    GMjihlVAEQlmHMQk

    • Once both feet are removed, two (40 mm) screws will reveal themselves. Unscrew these.

  3. ajR16IMjy1ThZ1VF
    ajR16IMjy1ThZ1VF
    XLNQHTREORDbnJbA
    reu32yRPjOgCh5YK

    • Working your way around the outer edges of the Flex 15, remove the 8 (30 mm) outer screws.

  4. JVBib5G3yplytlBy

    • Remove the one (40 mm) screw in the middle of the Flex 15.

  5. D6VhCLX1EQCouaxD
    D6VhCLX1EQCouaxD
    S6yTpxCLThWgbsCS
    fMDTdOMYWtwNklAs

    • Using a plastic opening tool, make your way around the edge of the laptop.

    • There is a visible line between the bottom shell of the laptop and the laptop body itself.

  6. kHnGUVT4iLMKw1JT
    kHnGUVT4iLMKw1JT
    bH6dARkCcClhR332

    • Make sure to pry evenly around this edge and only remove the bottom of the laptop when it is fully loose.

    • Using excessive force may break the bottom plastic. There are plastic clips along the edge of the laptop.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Brent

Mitglied seit: 04/03/16

804 Reputation

0 Kommentare