Einleitung
If you are trying to replace your current hard drive, this guide will walk you through the process.
Werkzeuge
Ersatzteile
-
-
Start by removing the feet near the LCD hinge of the laptop to reveal two screws.
-
Using a Phillips #1 screwdriver, remove the top five (30 mm) screws underneath the battery.
-
-
-
Working your way around the outer edges of the Flex 15, remove the 8 (30 mm) outer screws.
-
-
-
Using a plastic opening tool, make your way around the edge of the laptop.
-
There is a visible line between the bottom shell of the laptop and the laptop body itself.
-
-
-
Make sure to pry evenly around this edge and only remove the bottom of the laptop when it is fully loose.
-
-
-
Locate the hard drive assembly on the top right hand corner of the Flex 15 based on the orientation of the device in the picture.
-
-
-
Begin by unscrewing the four (20 mm) black screws that surround the hard drive’s metal cage.
-
Once removed, remove the black SATA connector by pulling it from the hard drive unit towards the right hand side of the laptop.
-
-
-
The hard drive should be freed from the base of the laptop.
-
There are four (20 mm) black screws surrounding the hard drive from the cage. Two on each side.
-
Unscrew these to free the hard drive from the cage
-
To reassemble your device, follow these instructions in reverse order.