Lenovo Ideapad Flex 4-1570 Cooling Fan Replacement

Geschrieben von: Isaiah Vang
  • Kommentare: 0
Lenovo Ideapad Flex 4-1570 Cooling Fan Replacement

Schwierigkeitsgrad

Moderate

Schritte

6

Zeitaufwand

5 - 10 Minuten

Einleitung

If the laptop is loud, sounds irregular, and the bottom is hot, use this guide to replace your cooling fan.

  1. ojWRnVYoqxDJaEkV

    • Shut down and unplug your laptop before you begin.

  2. CiRWrVBfipjoFWvN

    • Remove the nine 6 mm screws using a T5 Torx Screwdriver.

    • Remove the two 10 mm screws using a T5 Torx Screwdriver.

  3. OMTwerHSbE4xSCXP

    • Use a plastic opening tool to carefully pry off the back cover.

    • Remove the back cover.

  4. ccnYKHQbsIUunRAP
    ccnYKHQbsIUunRAP
    nMb3FB4mfSJwK1Fn

    • Remove the three 5mm screws using the T5 Torx Screwdriver.

  5. WhvZOiHOKVnHCkbH
    WhvZOiHOKVnHCkbH
    dbbQkfgKHKBmTDhn

    • Pull black wire and gray wire away from cooling fan clips using the tweezers.

  6. xHPJ6Jf3ReKl4s3b
    xHPJ6Jf3ReKl4s3b
    bO3awFFdpP61lly3
    LYbraQAvsMhJxddO

    • Pull out the cooling fan from where it is attached and pull it up until you see where the wire is attached to the motherboard. Using the iFixit Opening Tools, detach the connector.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Isaiah Vang

Mitglied seit: 04/10/18

669 Reputation

0 Kommentare