Einleitung

Learn how to remove the speakers from the Miix 2 in a few, quick steps.

  1. 12Hk4GxWiybsEHyD
    12Hk4GxWiybsEHyD
    Gw5FW6nhL6QtTtJA
    • Remove the back cover of the tablet by inserting a nylon or metal spudger in the small hole between the screen and rear cover near the volume button. Slide the tool along the edge of the tablet to release the internal clasps.

    • You should have to apply a good amount of force, but pry carefully in order to avoid damaging the clasps or the internals.

  2. Y3jRH4vZ64wPeU5B
    Y3jRH4vZ64wPeU5B
    XRSTVdbMSLOYiTwF
    • Unscrew the six 3mm screws surrounding the battery dock using a Phillips #0 screwdriver.

  3. 6QsV5HaJKYADWB2E
    6QsV5HaJKYADWB2E
    etXteVIrhgwBtcLs
    • Using a plastic spudger, slowly push each side of the battery connector (back and forward a couple of times) out of its socket on the motherboard.

  4. UxjbpUHqRQLhKX12
    UxjbpUHqRQLhKX12
    LwZlE6OkmF6jZdDM
    • Remove the battery by prying up with your fingers or a plastic opening tool.

  5. 1VpjqOqMxyrW1NaO
    1VpjqOqMxyrW1NaO
    YpLDBgajQAyQCXYo
    • Remove the red and black connector cable linking the speakers to the motherboard with tweezers by pulling the connector to the left with a light degree of force.

    • To properly remove the speakers from the casing, push gently left until it shifts, then pull directly up.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Diana Chiu

Mitglied seit: 15/07/14

654 Reputation

0 Kommentare